I have added code that will check two SPOTs per boat so the Captain and Crew can each have a SPOT. Note that only one track will show because both SPOTs will be associated with one boat.
I only have one SPOT so I cannot give this a robust test. I am hoping some of you can help test it. We need at least 2 tests as follows:
- Turn on one SPOT and use it as the guidelines suggest. After several track point and a couple of OK messages shut the first SPOT off and turn on the second SPOT. Operate it for awhile using both tracking and OK messages. Your track in the mapper should show all points.
- Turn on both SPOTs. Set one in tracking mode for the duration of the trip. Use the other one just for OK messages for the duration of the trip. Your track in the mapper should show all points.
Make sure both SPOTs are set for the same time zone.
If you can think of other variations go ahead and do them.
Let me know if anything looks wrong.